ZDMAK FOREIGN CAR TOOLS FOR VOLKSWAGENVOLKSWAGEN and MoreSuper Duty Headbolt Tool 37.50- (Found July 5, 2008 ) Headbolt Tool ....Read:Same as Number T10070 Super Strong Headbolt Tool 12 Drive (notice the solid one piece design) Tool used to remove and install cylinder headbolts. New "Stronger" One Piece design. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 12" Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socket The old tool number was 3452 and is now discontinued.....http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ST0329&CTMP=1&LowCt=0 T Handle Spark Plug Tool wMagnet 19.99- (Found July 5, 2008 ) Extra Long 450mm T Handle Spark Plug Wrench With 58 inch magnetic Socket. For recessed spark plugs. Universal (Flex Head) for hard to reach plugs.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-3649C&CTMP=1&LowCt=0 T.D.I. Timing Kit 3 Tools 96.50- (Found July 5, 2008 ) T.D.I. and New Beetle Cam Kit for correct and trouble free installations. Three crucial tools for changing timing belt on engine ALH. Chassis 1999 12 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003. Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right) This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VA6014AMK&CTMP=1&LowCt=... V Belt Tool 139.50- (Found July 5, 2008 ) 3299 TOOL USED TO REMOVEINSTALL RIBBED V BELT ON ALTERNATOR. THIS IS AN ORIGINAL FACTORY TOOL MADE IN GERMANY.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW3299&CTMP=1&LowCt=0 V8 Camshaft Securing Bar 98.00- (Found July 5, 2008 ) V8 Timing Tool T40005 Camshaft Securing Bar Audi A6 A8Used for the crucial task of securing both engine banks, cam shafts at T.D.C when replacing the timing belt.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=T40005&CTMP=1&LowCt=0 Valve Adjustment Tool 45.99- (Found July 5, 2008 ) 13mm Jam Nut Valve Adjustment Tool Designed for a wide variety of cars with 13mm jam nut valve adjustment screws. This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the adjustment screw as the jam nut is tightened. This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SCH-88900X13&CTMP=1&Low... Valve Spring R&R Kit 00- (Found July 5, 2008 ) This set is used to remove and install the valve spring with the cylinder head still on the engine and in the car, or with the cylinder head removed. The multi point adjustable base of this tool bolts securely to the head while the adjustable lever mechanism pivots from the bar thus compressing the spring. Quick removal and installation of the spring retaining keepers is then easily accomplished through the large openings on both sides of the compression tube. This set comes..http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SCH-79400&CTMP=1&LowCt=... Volkswagen Door Tool 9.99- (Found July 5, 2008 ) T10011 Volkswagen Door Tool triple Square 4This is the correct tool for the job New Beetle Tool This tool is used for R & R of door handle screws. Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.This tool is a high quality item you will like.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=T10011&CTMP=1&LowCt=0 Volkswagen Filler Tool 5.99- (Found July 5, 2008 ) NUMBER VW170 Tool is for Air Cooled VW repair, and is designed to remove and install the nut that holds the oil filler and breather tin to the generator stand. Designed to snap over a 12 drive extension, this tool easily reaches down into the oil fill, to remove or tighten the hard to get at retaining nut.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW170&CTMP=1&LowCt=0 VR6 Camshaft Alignment Tool 19.99- (Found July 5, 2008 ) 3268 Camshaft Alignment Volkswagen VR6 This is an Original Matra Tool Made in Germanyhttp://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW3268&CTMP=1&LowCt=0 |