ZDMAK FOREIGN CAR TOOLS FOR VOLKSWAGEN

Set 9 Feeler Guage and Blades 89.00 - (Found July 5, 2008 )

Set of Assorted Feeler Guages with Blades Range: .002 (.05mm) thru .018 (.45mm). These comfortable grip feeler guages have been designed for measuring the valve adjustment on engines of many foreign and domestic vehicles. Allowing for easy access into the confined area of the rocker arm. Replacement blades are available (blades are stamped with both inch and metric...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SCH-88600&CTMP=1&LowCt=...

Set 3424 Plus 3186 79.99 - (Found July 5, 2008 )

Set 2 TOOLSSpreader Socket Number 3424 This tool is used on all A4 platform VWs including Golf, Jetta, and Gti, 337, 20a.e. GTI model year 1999 to present Tool is used any time the strut needs to be separated from the wheel bearing housing Most common would be changingreplacing struts, coil spring, or the entire strut assembly You would also use this tool when servicing the wheel bearing Why do you need to use it you can not easily remove the strut from the wheel bearing...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW3424W3186&CTMP=1&LowC...

Red X Dog for Volkswagen Audi 189.99 - (Found July 5, 2008 )

ZDMAK D023X REDXDOG LITEOFF One of the most popular versions of VAG (VWAudiSeatSkodaFord) reset tool. First, it provides you with the capability of resetting the oil service and inspection service reminder displays. In addition, you can also reset all fault codes, (both those with and without a dashboard indicator) on all vehicle systems. Applicable: All vehicles with digital diagnostic systems.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=DIA-REDXDOGVW&CTMP=1&Lo...

Scraper Set 3 Pc . 29.99 - (Found July 5, 2008 )

Stainless Steel Scraper Set 3Pc.bolster handled scrapers, packaged in vacuum formed tray and shrink packed.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ZV-SS7000&CTMP=1&LowCt=...

Seal Driver 26.50 - (Found July 5, 2008 )

SEAL DRIVER FOR INSTALLATION OF OIL SEAL FOR DRIVE SHAFT FLANGE 2.INSTALL TRAN.SIDE COVER SEAL. 5 SPD 016 093 THIS IS AN ORIGINAL FACTORY TOOL MADE IN GERMANY.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW2062&CTMP=1&LowCt=0

Seal Installer 119.50 - (Found July 5, 2008 )

3241 SEAL INSTALLER USED TO PRESS IN CAMSHAFT OIL SEALS. V6 ENGINE THIS IS AN ORIGINAL FACTORY TOOL MADE IN GERMANY.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW3241&CTMP=1&LowCt=0

Set 2 Sockets 22mm 39.99 - (Found July 5, 2008 )

Open Socket Plus Crowfoot SetBoth Tools are 22mm.Details:22mm (Open) Tube Socket (Number 4491A 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 23 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.Plus Oxygen Sensor Socket 4491bThis is a Special 22mm Crowsfoot Socket with 38 Drive...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-4491ABSET2&CTMP=1&Lo...

Set 2 Tie Rod Tools 83.00 - (Found July 5, 2008 )

Set of 2 Pullers including:Large Tie Rod Tool VW 1014 Separator used for disassembly of pitman arm type tie rod ends without tearing the ball joint boots. Opening size is 25mm. Most VW Audi & Late Porsche models.PLUS Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=266HT2&CTMP=1&LowCt=0

Set 3424 Plus 3077 79.99 - (Found July 5, 2008 )

Set 2 TOOLSSpreader Socket Number 3424 This tool is used on all A4 platform VWs including Golf, Jetta, and Gti, 337, 20a.e. GTI model year 1999 to present Tool is used any time the strut needs to be separated from the wheel bearing housing Most common would be changingreplacing struts, coil spring, or the entire strut assembly You would also use this tool when servicing the wheel bearing Why do you need to use it you can not easily remove the strut from the wheel bearing...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW3424W3077&CTMP=1&LowC...

Set 3424 Plus 3078 79.99 - (Found July 5, 2008 )

Set 2 TOOLSSpreader Socket Number 3424 This tool is used on all A4 platform VWs including Golf, Jetta, and Gti, 337, 20a.e. GTI model year 1999 to present Tool is used any time the strut needs to be separated from the wheel bearing housing Most common would be changingreplacing struts, coil spring, or the entire strut assembly You would also use this tool when servicing the wheel bearing Why do you need to use it you can not easily remove the strut from the wheel bearing...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=VW3424W3078&CTMP=1&LowC...