ZDMAK FOREIGN CAR TOOLS FOR ASIAN AUTOASIAN AUTO and MoreCarburetor Wrench 22.00- (Found July 8, 2008 ) Carburetor Base Wrench 10mm x 12mm 12Pt box, thin head.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ZV-V392&CTMP=1&LowCt=0 Civic Counter Holder 79.50- (Found July 8, 2008 ) Honda Factory Style Holder Needed to properly counter the rotation of the crank shaft pulleyharmonic balancer during R&R of crank bolt. Comes complete with the proper 2.5 foot long securing bar. Applicable: Model Civic 1980 and Newer. Comes as shown with an adjustable locator lack pin and a 2.5 ft long securing bar, which locks onto the head. See Master Kit for more...(number H070)http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HO-60&CTMP=1&LowCt=0 Counter Holder Bonus Kit 145.00- (Found July 8, 2008 ) Special kit for the professional Honda Acura Technicians 2.5 foot long Securing bar. Used to properly counter the rotation of the crank shaft pulley harmonic balancer during R&R of crank bolt. Honda and Acura models, 90 and newer with a 50mm hex slot in crankshaft puller harmonic balancer. and Civic, 80 and newer.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HO70&CTMP=1&LowCt=0 Crank Belt Puller 32.99- (Found July 8, 2008 ) Crank Shaft Pulley Belt Puller TOY 135 Puller needed for the proper extraction of pulley from crank shaft. Applicable: Toyota model Cressida and Supra 82 1988 with 5MGE engine.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=TOY-135&CTMP=1&LowCt=0 Expanding Compressor Kit 35.99- (Found July 8, 2008 ) Used to compress and secure the hydraulically activated belt tensioner. This tool presses against a neighboring water pump pulley and expands as you rotate the 17mm nut. When fully compressed, place locking pin into hydraulic piston push rod.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=TOY-005&CTMP=1&LowCt=0 Honda Accura Counter Holder 79.50- (Found July 8, 2008 ) HO50 applicable Honda and Acura models 1990 and Newer with a 50mm hex slot in crank shaft pulley harmonic balancer.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HO-50&CTMP=1&LowCt=0 Honda Acura B90 Only 379.00- (Found July 8, 2008 ) Call or Email with any questions.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=B90-HA&CTMP=1&LowCt=0 Honda Acura Crank Seal Set 56.00- (Found July 8, 2008 ) Honda Acura Crank Seal Kit This crankshaft oil seal installation kit was designed for proper and easy harmonic balancer oil seal installation. The press cup is high quality anodized aluminum which will not damage the oil seal or the engine. The threaded stepbolt screws into the crank bolt hole. The press nut and washer provides the technician with an even and straight pressing force, seating the new oil seal into the engine case with ease.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HO-115-WB&CTMP=1&LowCt=... Honda Dust Seal Tool Driver 14.00- (Found July 8, 2008 ) For the proper installation of the dust seal onto the front knuckle. Applicable: Most early Honda model.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HO12&CTMP=1&LowCt=0 Honda Pulley Holding Tool 59.50- (Found July 8, 2008 ) This tool is used for removal and installation of the crank bolt on most Honda and Acura engines. In operation with the use of a 12" breaker bar or ratchet this tool holds the harmonic damper pulley from rotating when removing the pulley bolt. There is a hole in the center of the tool to allow the use of a socket and extension to break loose or tighten the pulley bolt.Applications Accord 2.2L 4 cylinder 90 97; 2.7L 6 cylinder 96 97; 2.3L 4 cylinder 98 & later; 3.0L V 6 98 &..http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-60100C&CTMP=1&LowCt=... |