ZDMAK FOREIGN CAR TOOLS FOR VOLVO TOOLSVOLVO TOOLS and MoreTie Rod Tool 39.95- (Found June 19, 2008 ) Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.Click here for a Diagram on this tool.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=266H&CTMP=1&LowCt=0 Timing Belt Tensioner 44.95- (Found June 19, 2008 ) Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster. On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4...http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-633VO&CTMP=1&LowCt=0 Timing Belt Tensioner 44.95- (Found June 19, 2008 ) Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster. On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4...http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-633V&CTMP=1&LowCt=0 Top Dead Center Indicator 14.99- (Found June 19, 2008 ) Top Dead Center Indicator 9710 Used for T.D.C. on any Gas engine. Simply unscrew a spark plug and twist the rubber hose part of this tool into the spark plug hole. As you rotate the engine with a turning bar, the piston forces air through the whistle part of this tool. Once the whistling stops the engine is at T.D.C.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=9710&CTMP=1&LowCt=0 Torx GearWrench Set 68.20- (Found June 19, 2008 ) GearWrench E Torx Set (E6 to E24) Wrench sizes E6 x E8, E10 x E12, E14 x E18, E20 x E24 Special storage tray fits... The Gear Wrench brand of wrenches provides a unique ratcheting mechanism within the box end side. Designed for tight locations, only 5 degrees of movement is required. These wrenches are tough, nicely polished, and will quickly become your preferred wrench.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=KD-9224K&CTMP=1&LowCt=0 Torx Set 14.99- (Found June 19, 2008 ) Torx Tamperproof Set with 14 Drive and 38 Drive sizes. 11 Pieces, sizes included: (38 drive) T40, T45, T50, T55 and T60.(14 Drive) T10, T15, T20, T25, T27 and T30.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-3902G&CTMP=1&LowCt=0 Torx Socket 4.99- (Found June 19, 2008 ) Torx Tamperproof (Hole in Tip) Socket (6 Point =Torx) Comes with 38 Drive Size T50http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-113TPR&CTMP=1&LowCt=... Torx Socket 4.99- (Found June 19, 2008 ) T60 Torx Tamperproof (Hole in Tip) Socket (6 Point = Torx) Comes with 38 Drivehttp://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-1160TP&CTMP=1&LowCt=... Torx Socket 14 Drive 4.99- (Found June 19, 2008 ) Torx Tamperproof (Hole in Tip) Socket (6 Point =Torx) Comes with 14 Drive Size T27http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-1156TP&CTMP=1&LowCt=... Torx Socket 14 Drive 4.99- (Found June 19, 2008 ) Torx Tamperproof (Hole in Tip) Socket (6 Point =Torx) Comes with 14 Drive Size T30http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=SC-1157TP&CTMP=1&LowCt=... |