ZDMAK FOREIGN CAR TOOLS FOR MERCEDES TOOLSMERCEDES TOOLS and MoreOrbit Pivoting Driver Set 2 22.50- (Found June 19, 2008 ) Set of 2 Drivers SoftFinish Orbit Pivoting Phillips: Set includes Driver Size 1 and 2 With the new development SoftFinish Orbit, Wiha has again succeeded to set the standard in the tool industry. The speciality of this tool is the spring mounted pivoting tip, which centers itself independently when being inserted into the screw head. The result is a screwdriver, which is strength saving, particularly comfortable and allows quick work for angles of up to 20. The carefully...http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=W-31199T2&CTMP=1&LowCt=... On Sale 22mm Crowsfoot Socket 12.50- (Found June 19, 2008 ) ON SALE22mm OXYGEN SENSOR SOCKET This is a Special 6 Point 22mm Crowsfoot Socket with 38 Drive Used for the removal and replacement of Oxygen Sensor that are situated within a confined area. No need to snip the wires leading to the unit when all you want to do is check the sensor. Applicable: Many European Models.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-4491GB&CTMP=1&LowCt=... On Off Ratio Tester 399.00- (Found June 19, 2008 ) Discontinued. Tester Appl: 1980 93 For checking OnOff Ratio and testing C.O. levels, including late model 100100IR settings.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ZX-M0039MB&CTMP=1&LowCt... Oil Seal Arbor 65.00- (Found June 19, 2008 ) needed for the proper installation of oil seal on pulley side of crank shaft. Applicable: Mercedes engine M110, M114, M115, M116, M117, M130, M180, OM615, OM616, OM617http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0061&CTMP=1&LowCt=0 Pin Wrench Socket 79.95- (Found June 19, 2008 ) M0007 Threaded Pin Wrench Socket This tool is used for the proper R&R of threaded ring which secures prechamber in cylinder head. The Mercedes number for this tool is 615 589 0007 00 Applicable: OM601602603 engines through 1989 with vertical injection. Also OM615, OM616, OM617 Ref: 615 589 0007 00http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0007&CTMP=1&LowCt=0 Pin Wrench Socket 49.95- (Found June 19, 2008 ) Groovenut Socket 12 inch Drive Ref: Same as 915 589 0207 00 This tool is used for R&R of grooved nut on rear axle shaft flange, necessary when replacing axle bearing or seal. Applicable: Mercedes chassis W107, W114 , W115 , W116 , W123 , W126. Models with constant velocity joint axles Click here to see the Diagram on this Toolhttp://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=915-0207&CTMP=1&LowCt=0 Push Pin Pliers Set of 2 39.95- (Found June 19, 2008 ) PUSH PIN REMOVAL PLIERS SET Push pin pliers are designed to remove plastic push pins on Honda, Toyota, GM, Saturn and many other vehicles. Special ground tips remove the pins without damage. Pliers can also be used to remove U Joint circle clips. One tool with a 75 degree offset head to allow push pin removal in tight areas. These tools will save you time and headaches.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ZV-V2300P&CTMP=1&LowCt=... Puller Guide 37.50- (Found June 19, 2008 ) Sliding Puller Guide needed for the proper extraction of rail pins from cylinder head. Comes equipped with a 5mm and 6mm extractor pin. SAME AS BENZ NUMBER 915 589 0733 00http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0001&CTMP=1&LowCt=0 Puller Bracket Type 45.00- (Found June 19, 2008 ) Mercedes Puller Bracket Type ITEM M0006 This tool is used for the proper extraction of steering pump pulleys. Applicable: Most Mercedes models.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0006&CTMP=1&LowCt=0 Puller (Collet Type) 175.00- (Found June 19, 2008 ) Used for the proper removal of spacer ring from the pulley side of crank shaft. Applicable: Mercedes engine M102, M110, M114, M115, M116, M117, M130, M180, OM615, OM616, OM617. SAME AS BENZ 102 589 0033 00http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0033&CTMP=1&LowCt=0 |