ZDMAK FOREIGN CAR TOOLS FOR MERCEDES TOOLSMERCEDES TOOLS and MoreExtractor plus Splined Socket 98.95- (Found June 19, 2008 ) Set of 2 Tools Extractor Tip Double Ended (Item M0046) Used for the proper removal of prechamber from cylinder head. Can be used in conjunction with a slide hammer. Applicable: Mercedes engine OM601, OM602, OM603, OM604, OM615, OM616, OM617. 9Ref: number for this extractor is MB 902 589 0033 00) Plus Special Male Splined Socket with 12" drive. Used for the proper R&R of threaded ring which secures prechamber in cylinder head. Applicable: Mercedes 1990 up 602603..http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0046H009&CTMP=1&LowCt=... Extractor Tip 23.50- (Found June 19, 2008 ) Used for pulling chain tensioners. Used in conjunction with a slide hammer. Applicable:Mercedes engine M110.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0002&CTMP=1&LowCt=0 Extra Long Torx Driver 22.99- (Found June 19, 2008 ) T30 Torx, with 10 inch Long Pattern Screwdriver.For work on engine, dash, doors and body.World Class Hazet Tools Made in Germany!http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HAZET803LGT30&CTMP=1&Lo... Expansion Tank Adaptor 56.00- (Found June 19, 2008 ) M0077 Expansion Tank Adaptor Used for pressurizing the liquid cooling system on models with a "male" threaded filler neck on expansion tank. Applicable: Mercedes E Class 96 and Newer.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0077&CTMP=1&LowCt=0 Expanding Hood Prop 28.50- (Found June 19, 2008 ) Telescoping Hood Prop 20 to 46 inch range. Red anodized Aluminum twist lock. The image shows both positions.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ZV-V388&CTMP=1&LowCt=0 Flexible Shaft Hex Nut Driver 13.99- (Found June 19, 2008 ) Flexible Hex Nut Driver Sizes on this nut driver is 8mm This is a great deal for a HEX NUT DRIVER Rubber coated flexible shaft. Flex Nut Drivers work well on hose clamps, hex headed screws and nut screws.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-19388&CTMP=1&LowCt=0 Flywheel Retainer 99.99- (Found June 19, 2008 ) Flywheel retainer m102, m103, om601, 602 & 603.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-M0240&CTMP=1&LowCt=0 Front Lower Control Arm Tools 169.50- (Found June 19, 2008 ) Front Lower Control Arm Tools M0062 Press Kit needed for the proper installation of bushings into the front lower control arms. Applicable: Mercedes chassis W124, W129, W140. Each press washer has its own thrust bearing which eases the pressing action. This reduces friction, wear and tear of the tool, ensuring longevity.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0062&CTMP=1&LowCt=0 Hub Securing Bar Holder 29.99- (Found June 19, 2008 ) ON SALE Hub Securing Bar (Reference 113 589 0040 00) Used for securing Waterpump hub from rotating during R&R of Fan clutch nut. This holder bolts onto the hub, as the poly v belt is not in place and cannot be used to lock the hub. Applicable: M112 & M113, 119.986 (1996 and newer). Should be used in conjunction with a 36mm thin open end wrench.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-1714C&CTMP=1&LowCt=0 Hose Clamp Plier 29.99- (Found June 19, 2008 ) Hose Clamp Pliers Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic andor metal self tightening hose clamps with diameters of 1116" 2 12" (18mm 54mm) Precision clamp on end of flexible cable allows for extended reach where other models cannot reach Pliers can be locked, freeing up your hands and making your job easier and faster Pliers have a lifetime warranty Well made Plier with heavy gauge steel, operates in a smooth,...http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-9409&CTMP=1&LowCt=0 |