ThomasNet Industrial Newsroom - Mechanical Power TransmissionThomasNet Industrial Newsroom is a service of ThomasNet.comActuators are designed for high speed linear motion.- June 30, 2008 Providing smooth and quiet linear guidance, PL(TM), MT(TM), and MX(TM) series of linear actuators feature ball screw, lead screw, or belt drive options. PL series is mountable, MT series is available in different drive configurations (including vertical configuration) and different sizes, while MX series allows for high load capacity travel at high speeds. All 3 models work in multitude of environments, and carry t-slots which enable mounting. This story is related to the following:Mechanical...http://news.thomasnet.com/fullstory/818049 Cantilever Linear Actuator minimizes cycle times.- June 27, 2008 Featuring 1.5 ms max speed and choice of 100, 200, 300 stroke lengths, EGSA ball screw-driven cantilever actuator is available as complete solution with motor and controller or as individual component adapted to third-party motors. Solution has 6 kg max working load and repetition accuracy of &177;0.01 mm as well as choice of 50 and 60 mm drive width sizes. Suitable motor mounting kits for axial or reverse parallel motor configurations are available. This story is related to the...http://news.thomasnet.com/fullstory/546197 Linear Actuator features compact design.- June 24, 2008 Based on segmented spindle technology, KATAKA actuator has maximum pushpull force of 200 and 100 kg, respectively. With 50 mm height and 400 mm stroke, compact actuator is suited for applications where linear motion is required from confined spaces or the force is needed perpendicular to elevated surface. This story is related to the following:Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric MotorsSearch for suppliers of: Linear Actuatorshttp://news.thomasnet.com/fullstory/817925 Brushless AC Servo Motor has 8,000 countrev encoder.- June 23, 2008 Designed to run on SilverNugget N3 servo motor controllerdriver, Model QCI-A34M-1 features 400 oz-in. continuous torque, 450 oz-in. peak torque, 200 W continuous mechanical power, 100:1 inertial mismatch, 4,000 rpm, and 12-48 Vdc. Used for direct driving large flywheel loads, NEMA 34 IP50 rated motor suits applications such as winding, spooling, indexing, and tension control, in labeling, packaging, medical, automotive, and entertainment industries. This story is related to the...http://news.thomasnet.com/fullstory/817848 XYZ-Axis Stages feature precise linear ball guide system.- June 20, 2008 Offered in aluminum with black anodizing, brass, or 440C stainless with electroless nickel plating, XYZ-Axis Stages feature linear ball guide system that creates gothic arch groove ball guide on upper and lower side of stage body, optimizing rigidity. Units come in dovetail, linear ball, and crossed roller styles with rack and pinion, feed screw, or micrometer head feed mechanisms. Low-temp black chrome plating is available when low-light reflectivity or harsh environment operation is...http://news.thomasnet.com/fullstory/545807 Motor and Drive offer efficiency better than NEMA Premium.- June 20, 2008 With outputs from 20-200 hp, WMagnet MotorDrive Packages offer efficiencies of 95-97%. Motors use rare earth permanent magnets in rotor to limit temperature rise during operation. Utilizing vector control technology algorithm, CFW-09 drive enables control without use of encoderposition sensor. As synchronous motor, WMagnet cannot be started directly from power supply because accurate synchronization of supply waveforms with rotor position is continuously required. This story is related to the...http://news.thomasnet.com/fullstory/545942 Brushed DC Motor delivers 250 W and reaches 90% efficiency.- June 20, 2008 Constructed with ironless rotor and 4-pole structure of Neodymium permanent magnets, mechanically commutated RE65 works detent-free and has minimal rotor inertia. Preloaded ball bearings support low-vibration and low-noise operation, and nominal voltage is in 18-70 V range. Depending on winding variation, 65 mm dia x 130 mm long cylindrical drive delivers nominal torque of 0.5-0.9 Nm at nominal speed of 2,400-3,700 rpm. This story is related to the following:Mechanical Power Transmission...http://news.thomasnet.com/fullstory/545955 Stepper Motor Controller is IP20-rated.- June 18, 2008 Designed for X20 controller and IO system, X20 stepper motor controller features 4 inputs for end switchesencoders, and automatic motor detection when booting and stall detection that identifies overload situations or any unwanted blocking of motor. Stepper motor connections can resolve each full step into up to 256 microsteps. Offering integration with Automation Studio and Soft CNC, unit is designed for bipolar 2-phase stepper motors, 1 A (24 V) or for 3 A (18-48 V) rated current. This story..http://news.thomasnet.com/fullstory/817877 Heavy Duty Linear Drive supplies up to 800 lb side thrust.- June 18, 2008 Running on case hardened and ground shaft, Model RG80 features rolling ring linear motion engineering, enabling mechanical control over reversal and eliminating need for electronic controls and reversible motor. Linear pitch may be manually adjusted without gear reduction or adjusting drive motor speed. With travel direction and linear speed independent of drive motor, RG80 simplifies machine design. Applications include spraying, slitting, scanning, and winding. This story is related to the...http://news.thomasnet.com/fullstory/545473 Mass Storage PMC incorporates serial storage technology.- June 16, 2008 Offering increased data transfer rates, SATA PMCDisk provides embedded system designers with flexible storage options. It comes with rotating or solid state flash SATA drives, and can be used on any CompactPCI, VMEbus, or VXS single board computer or carrier with standard PMC slot. Features include 2 universal IO voltage keying holes for 3.3 and 5.0 V operations, 2.5 in. hard disk with storage sizes from 40-250 GB, and 2.5 in. flash drive that is available up to 128 GB. This story is related to.http://news.thomasnet.com/fullstory/817693 |