ThomasNet Industrial Newsroom - Adhesives & SealantsThomasNet Industrial Newsroom is a service of ThomasNet.comAdhesive gels within 45 sec and is cured within 5 minutes.- June 26, 2008 Formulated for general purpose bonding, Type EP50-1 produces high strength bonds with more than 2,000 psi at room temperature that are resistant to thermal cycling and chemicals including water, oil, and organic solvents. Suited for metals, glass, ceramics, wood, and vulcanized rubbers, product is approved for service over temperature range of -60 to more than 250&176;F. It comes in premeasured, flexible divider pouches, disposable cartridges, and in pint, quart, gallon, and 5 gal...http://news.thomasnet.com/fullstory/818005 Hot Melt Adhesives come in finger-sized packages.- June 20, 2008 Designed to replace sticky cavity packaging and associated plastic waste, select Technomelt&174; Adhesives come in packets that load directly into dispensing tank where packet's dry outer casing melts with adhesive. Available in EVA, polyolefin, and pressure sensitive technologies, adhesives are used to manufacture filters, packaging, pressure sensitive adhesive films, insulation, textiles, vehicles, and structures. This story is related to the following:Adhesives and Sealants Sponsored by: ...http://news.thomasnet.com/fullstory/545894 Instant-Cure Cyanoacrylate Adhesive forms strong bonds.- June 19, 2008 Formulated to produce bonds with shear as high as 2,800 psi, MB297 is supplied as viscous liquid adhesive with viscosity of 2,000-2,400 cps at 20&176;C. Colorless solution, resistant to effects of extreme humidity, has refractive index of 1.48 and service operating temperature range of -65 to 185&176;F. Cures are moisture activated, and bonds are instantaneously formed with glass, metals, ceramics, plastics, and elastomers. Shore A hardness is 85. This story is related to the...http://news.thomasnet.com/fullstory/545860 Adhesives suit folding carton and glued lap applications.- June 13, 2008 VelocityP3(TM) 33-711A and 33-711B multi-purpose non-contact extrusion adhesives provide fiber-tearing bonds on all substrates. Type 33-711A offers high pressure of 600 cps, while Type 33-711B offers low pressure of 300 cps. Solvent free, low-VOC adhesives have above average heat and cold resistance, and support machining, allowing clean cut-off and restart recovery. They are compatible with extrusion systems from Bobst, HHS, Valco, Nordson, and Pafra. This story is related to the...http://news.thomasnet.com/fullstory/817639 Pressure Sensitive Adhesive Products suit medical market.- June 9, 2008 Products in Electrofix line are single-coated with medical grade acrylic adhesives in varying tacks and remove easily without leaving residue. They are supplied on range of flexible and conformable foam, film, non-woven, and laminate backings with heavy-duty glassine release liners. Dimensionally-stable and suitable for high speed conversion and die-cutting, products are available in white finishes or as clear polyethylene films. Other colors, including tan, are available on request. This story.http://news.thomasnet.com/fullstory/545433 UV Adhesive is USP Class VI approved for medical devices.- June 6, 2008 Suited for metals, glass, ceramics, and most plastics, optically clear UV10MED is 100% reactive and does not contain solvents or other volatiles. One-part adhesive has cure times ranging from 5-10 sec upon exposure to UV lamp to 2-3 minutes at ambient temperatures. Service operating temperature range is -60 to 250&176;F, and low viscosity UV10MED exhibits tensile strength greater than 4,000 psi, shore D hardness greater than 60, and elongation of less than 5%. This story is related to the...http://news.thomasnet.com/fullstory/817463 Light-Curing Adhesive suits needle bonding applications.- June 2, 2008 Designed for bonding syringes and other stainless steel cannula to polycarbonate, PVC, glass, and polypropylene hubs, MD&174; Medical Device Adhesive 1162-M produces clear bonds and has low viscosity for air-free dispensing into needle hub cavities. Capable of curing upon exposure to UVvisible light, it is designed for high-speed and high-volume automated syringe assembly. For in-line inspection, adhesive fluoresces blue under low-intensity black light. This story is related to the...http://news.thomasnet.com/fullstory/817319 |