ThomasNet Industrial Newsroom - Paints & CoatingsThomasNet Industrial Newsroom is a service of ThomasNet.comWater Reducible Enamel works on metal surfaces.- June 12, 2008 Formulated for accelerated drying times, Aquacron 880 Series interiorexterior enamel is intended for industrial use on bare or primed metal surfaces. Low-odor solution contains no heavy metals, comes in range of colors and gloss, and has no recoat window. Water can be used for reduction and clean-up, and product can be formulated to 2.8 VOC (less water) compliance. This story is related to the following:Paints and CoatingsSearch for suppliers of: Metal Enamels Water Based Enamelshttp://news.thomasnet.com/fullstory/545568 InteriorExterior Primer imparts corrosion protection.- June 12, 2008 Water-reducible alkyd primer, Aquacron 835, is suited for industrial use on bare metal surfaces where corrosion resistance is needed. It can be top coated with water reducible alkyd enamels or solvent-based enamels in field after thoroughly dried and contains no heavy metals. Along with less than 1 lb of organic HAPSgallon of solids, low-odor primer features 2.8 lbgal VOC-compliant formulation compatible with tap water reduction. This story is related to the following:Paints and CoatingsSearch..http://news.thomasnet.com/fullstory/545565 Polyester Urethane Enamel protects steel surfaces.- June 12, 2008 Applied directly to cleaned or blasted steel, Spectracron 380 promotes surface protection and colorgloss retention. This 2-component exterior-grade enamel has blended VOC of 3.5 lbgal max and imparts resistance to chemicals, abrasion, and impact. There are no hazardous air pollutants or SARA 313 constituents, and various colors and glosses are available. Poly-Iothane HS can be applied directly to cleaned or blasted steel as well as over 2K epoxy or polyurethane primers. This story is related to.http://news.thomasnet.com/fullstory/545569 Epoxy Primer is designed for wet-on-wet spray application.- June 12, 2008 Promoting corrosion resistance over cleaned and treated steel, Spectracron 560 suits short wet-on-wet application windows when topcoated with Spectracron 2K polyurethane enamels; polyurethane topcoat can be applied directly over this primer 10-15 minutes after application. Formulated with VOC less than or equal to 3.5 lbgal and less than 0.17 lb HAPSgal, this 2-component, chrome-free primer adheres to cleaned G90 galvanized steel and aluminum as well as fiberglass substrates. This story is...http://news.thomasnet.com/fullstory/545571 Primer protects bare metal surfaces.- June 12, 2008 Suitable for interior and limited exterior applications, Aquacron 833 can be field top coated with water reducible alkyd enamels or solvent-based enamels after thoroughly dried. Low-odor product contains no heavy metals, is VOC-compliant, and has less than 1 lb of organic HAPSgal of solids. Applications include metal fabrication, structural steel, industrial machinery, cabinets, racking, and shelving. This story is related to the following:Paints and CoatingsSearch for suppliers of: Industrial..http://news.thomasnet.com/fullstory/545554 Electroless Nickel Plating Service meets strict requirements.- June 5, 2008 NADCAP-certified electroless nickel plating meets MIL-C-26074D, ASTM B-656 and B-733, AMS 2404 and 2405, as well as aerospace contractor specs for corrosion resistance, hardness, and lubricity. With .001 in. thick deposit, it is available in high-phosphorous electroless nickel for dip brazed aluminum heat exchangers. Laser nickel, also available, offers .008 in. thick pit-free electroless deposit designed for optical polishing. This story is related to the following:ServicesPaints and...http://news.thomasnet.com/fullstory/545361 Coatings combine adjustable reactivity, accelerated cure.- June 5, 2008 Optimized for low or near-zero VOC, polyaspartic coatings offer favorable characteristics for outdoor weathering, gloss retention, and corrosion resistance. Rate of reaction and cure can be controlled to formulate mixture with potlife from 5 min to 2 hr. Product can be used as topcoat due to non-yellowing nature, and blocking of UV light prevents undercoat discoloration. Finished topcoat will bend on metal substrate without damage. This story is related to the following:Paints and...http://news.thomasnet.com/fullstory/545285 Lubricant Spray conditions belts while reducing noise.- June 4, 2008 NSF-registered and P1-rated, Sprayon&174; Belt Dressing contains no asphalt or rosin, and will not glaze or collect dirtdust. It is used to condition and increase pulling power of leather, rubber, canvas, fabric, flat round or V belts; auto fan belts; farm machinery belting; and all industrial belt drivers. Equipped with SPRAY ANYWAY(TM) valve, product can be applied directly to belts and sheaves of V belts while in use. This story is related to the following:LubricantsPaints and CoatingsSearch.http://news.thomasnet.com/fullstory/545205 |