ZDMAK FOREIGN CAR TOOLS FOR MERCEDES TOOLSMERCEDES TOOLS and MoreIgnition Turning Sleeve 16.99- (Found June 19, 2008 ) Ignition Turning Tool For loosening and tightening the ring (rosette) of the electronic ignition switch. Applicable: W129, 140, 202 (as of June 1, 1997), 208, 210, 211, 230, 240, 463 The Aluminum will not leave marks on the interior parts. Benz ref: 210 589 0007 00http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-1123&CTMP=1&LowCt=0 Injection Nozzle Socket 89.95- (Found June 19, 2008 ) Injection Nozzle Socket for Mercedes Benztype 202 and 210 engines 604, 605, 606 (with window)22mm Socket overall length is 110mmDrive size 12 inch.Reference tool number 606 589 0009 00This is a super high quality original factory tool made in Germany!http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=H606-0009&CTMP=1&LowCt=... Injector Adaptor for Mercedes 42.50- (Found June 19, 2008 ) Injector Adaptor for Mercedes Tool is used for checking the compression of diesel engines through the injector holes. Used in conjunction with a male fitting which has a 14" NPT. Applicable Mercedes Diesel engine models with 22 x 1.5mm injectors: OM602, OM603, OM604, OM605, OM606. NUMBER M0092http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0092&CTMP=1&LowCt=0 Mercedes Rubber Mount Set 320.00- (Found June 19, 2008 ) Rubber Mount Set Applicable: W208For removing or installing the rear rubber hydraulic mount in the Lower Control Arm. (mechanical type)http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=ZX-M208-0043&CTMP=1&Low... Angle Tip Relay Plier 9.99- (Found June 19, 2008 ) Angle Tip Relay Plier designed to remove and install relays which are usually located in hard to reach or confined areas. Specially coated tips offer a solid grip on the relay.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-1917C&CTMP=1&LowCt=0 Allen Wrench Holding Bar 8 x 10 19.50- (Found June 19, 2008 ) On Sale...Allen Wrench Holding BarComes complete with 8 and 10mm Allen bits. The 8mm is needed for R&R of fan clutch fastener Applicable M103, 104, 111, 119, 120 OM 602, 603, 605, 606The 10mm bit is for adjusting AC belt tension and R&R of idler pulley Models 420, 560 with V 8 1986 and newer.Ref 900 589 0307 00http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-1832C&CTMP=1&LowCt=0 9mm Brake Bleeding Wrench 28.50- (Found June 19, 2008 ) High Quality Brake Bleeding wrench 9mm. Made in Germany by Hazet.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HAZET49689&CTMP=1&LowCt... 9mm Ball Tip Hex Socket 22.00- (Found June 19, 2008 ) 9mm Ball Tip Hex Socket 38 Drive. Overall Length is 116mm. Super High Quality Tools Made in Germany!http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HAZET8801KK9&CTMP=1&Low... 8mm Hex 12 Drive 13.99- (Found June 19, 2008 ) Big Sturdy 12 Drive Hexagon 8mm (Allen) Socket 12" drive Overall length of the tool is 4 14 inches. Tool used for cylinder headbolts. Heavy Duty 8mm Allen.http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-35048MM&CTMP=1&LowCt... 8mm Ball Tip Hex Socket 22.00- (Found June 19, 2008 ) 8mm Ball Tip Hex Socket 38 Drive. Overall Length is 116mm.Super High Quality Tools Made in Germany!http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=HAZET8801KK8&CTMP=1&Low... |