Search   Feed   Browse   Add
Feed items 71 - 80 of 215 for June 2008

Seal Guide 31.00 - (Found June 19, 2008 )

Needed to prevent damage to the seal during installation of timing cover with seal already in place. Applicable: Mercedes engine M104, M103 031989 and newer
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0003&CTMP=1&LowCt=0

Remote Starter 13.99 - (Found June 19, 2008 )

Remote Starter SwitchHeavy gauge, rubber covered copper wire, a tough, smooth working, reliable switch.Depress button to jog or start the engine.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-1710S&CTMP=1&LowCt=0

Spark Plug Boot Puller 34.99 - (Found June 19, 2008 )

Spark Plug Metal Boot Remover Wrench Newer Mercedes V 6 engines are equipped with a (2) spark plug wire andor metal boot per cylindetr set up. This special wrench 17mm with its specific angle along its tapered machined surface of the box end allows it to fit into those metal spark plug boots after the coil pack has been removed. This special tool is the only good way to ensure that the metal boots and plug wires remain damage free during removal. Overall length is 12.5...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0094&CTMP=1&LowCt=0

Spark Plug Wire Plier Bonus Set 47.99 - (Found June 19, 2008 )

SET OF 4 TOOLSSpark Plug Wire Pliers Used to remove the newer high voltage type wires Wide grip section and special angle. makes it easy to remove wires without separating crimps. Applicable: 102, 103, 104, 110, 115, 116, 117, 119, 120 Same as Mercedes Tool Number 104 589 0037 00 also same as Zdmak item M104 0037X PLUS SET OF 3 SOCKET TOOLSSet of 3 Spark Plug Tools Including : Extra Long 58 (16mm) Spark Plug Socket Overall Length is 4 12 inches. 38 Drive size. Knurled...
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=MK-1633WSET4&CTMP=1&Low...

Super 3mm Hex 11.50 - (Found June 19, 2008 )

Super Long T Handle with 3mm Hex Allen. Overall Length 15 inches. Blades of Special CRM 72 Tool Steel. Through Hardened, Anti corrosion Nickel Finish Ergonomic Comfort Grip T Handle Shaped for Maximum Power & Comfort Handle Molded over L Key for permanent bond. Guaranteed Quality Made In Germany!
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=W-33435A&CTMP=1&LowCt=0

Suction Gun 12.99 - (Found June 19, 2008 )

54220 S Suction Gun Perfect for transmissioins, differentials, gear cases, lower units, crankcases, etc. No priming necessary Die cast zinc head cap 12" flexible hose 1 pint capacity.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=AW-54220-S&CTMP=1&LowCt...

Stud Puller Set Metric 29.95 - (Found June 19, 2008 )

4 Piece Stud Remover Set Engine block studs usually need to be removed before machining. Roller cam design locks on stud to remove or install studs with minimal thread damage. Set works on 6mm, 8mm, 10mm and 12mm studs. Remove right or left threaded studs without damaging threads. Turn with 12in. drive ratchet or 1316in. wrench. Pass through design is perfect for extra long studs.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=AW-89414&CTMP=1&LowCt=0

Stubby Set and Driver Bonus 35.00 - (Found June 19, 2008 )

Socket Set plus 14 inch Flexible Driver Drive size on the sockets and the flex tool is 14 inch.Flexible Drivers work well on many applications. This is a very handy tool especially used in conjunction with these stubby sockets.Rubber coated flexible shaft. Metric Hex Stubbies 14 Drive 9 Piece SetStubby Hex Metric Sockets in small popular sizes. These are the Sturdy One Piece Design. Quantity 9 Sockets Hex (Allen) Sockets great for working on German Cars.Sizes included: 2mm, 2.5mm,.
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=JT-400HEXPLUS&CTMP=1&Lo...

Steering Pump Puller 76.00 - (Found June 19, 2008 )

Collet Type Puller used for the proper extraction ofpulleys LS 75, LS 85, LS 90Ref tool number 108 589 0233 00
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0005&CTMP=1&LowCt=0

Steering Box Repair Kit 85.00 - (Found June 19, 2008 )

This Steering Box Repair Kit is needed for proper R&R of locking grooved nut and sector control piston. Applicable: Mercedes steering LS90
http://www.zdmak.com/wbstore/main.asp?action=PROD&PROD=M0036&CTMP=1&LowCt=0
Available Archives
- June (215 items)
Sponsored Links
© 2008 FeedCapsule.com  |  Contact